Asphalt Shingle Roofing Tacoma WA | Wind-Rated Install

Last updated: 2026-08-30

Tacoma Roofing is a roofing company serving Tacoma and Pierce County, and asphalt shingle roofing is one of the services we handle most. This page covers what the work involves here specifically — the climate, the code, and what it costs — rather than what it involves in general.

What we do on the first visit

The first visit is an inspection, not a sales call. We walk the roof with you, check the deck from the attic side where we can, count valleys and penetrations, and note the pitch and how much staging or safety equipment the job needs. We confirm whether any prior layers are on the roof already — code allows a maximum of two before a full tear-off is required — and then you get a written per-square price with tear-off and any deck repair as separate lines.

If we think repair is the better spend than replacement, or a different material suits your situation better, we say so on that visit — including when it means the smaller job for us.

What's included

Architectural shingle rated for wind exposure, not builder-grade 3-tab
Wind-rated synthetic underlayment and ice-and-water membrane at eaves and valleys
New flashing at every penetration, never reused off the old roof
Ridge and hip cap installed to manufacturer spec for wind-uplift resistance
Full tear-off to the deck, with any rotten sheathing replaced and priced as its own line
Color and profile options that clear Landmarks Preservation Commission design review for North Slope and Stadium-Seminary historic-district properties
A written price broken out by shingle tier before any work starts
Full cleanup, magnet sweep, and haul-away

Asphalt Shingle Roofing in progress on a property in Tacoma, WA

What this costs in Tacoma

Asphalt Shingle Roofing runs $420–$1,040 roofing square (100 sq ft), installed in this area. Derived from Valentine Roofing's Tacoma-specific architectural composite shingle total ($10,400-$26,000 for a full job) divided over a typical 25-square home — the same basis used in the site's cost calculator. The things that move a job up its range are tear-off, how much deck repair is needed, pitch, and how many valleys and penetrations your roof has. If you want a number before you call, the roof cost calculator will get you close.

When it needs doing

Granule loss visible in gutters
Curling, cupping, or cracking shingles
Missing or wind-lifted shingles after a Puget Sound storm
Roof approaching 20+ years old
Visible daylight through the attic roof deck
Preparing to re-roof a North Slope or Stadium District Craftsman or Foursquare home

DIY patch, the cheapest bid, or the job done properly

	DIY weekend	Cheapest bid	Done properly
Moss removal	Pressure washer — strips granules, drives water under tabs	Quick scrape, no treatment applied	Gentle hand/brush removal plus treatment, gutters cleared
Material grade	Bargain shingle off the shelf, no algae resistance	Standard grade, warranty terms rarely disclosed	Algae-resistant or premium-grade material with a real warranty, disclosed in writing
Underlayment	Whatever’s left over, felt paper reused	Minimum-code synthetic underlayment	High-wind-rated synthetic underlayment, ice-and-water membrane at eaves and valleys
Deck check	Not considered	Skipped unless asked	Checked from the attic side where access allows, repaired if moss has reached it
Permit	Often skipped	Sometimes skipped	Pulled and inspected every time
If it fails	Your weekend, again, now with a worse leak	Chasing a phone number that stopped working	We come back and fix it

How it works

How asphalt shingle roofing runs

Free inspection
We check the existing roof, deck condition, and wind exposure of the specific lot before quoting material.
Material selection
Architectural shingle chosen for wind rating and, where relevant, historic-district color and profile requirements.
Tear-off and install
Full tear-off, deck repair where needed, underlayment and flashing installed, shingle installed to manufacturer wind-uplift spec.
Final walkthrough
Cleanup, magnet sweep, and a walkthrough of the finished roof before we leave.

Questions

Asphalt Shingle Roofing questions

What's the difference between architectural and 3-tab shingle?

Architectural shingle is heavier, carries a higher wind rating, and lasts longer — a real difference on a property with direct Puget Sound or Tacoma Narrows exposure, where 3-tab is more likely to lift in a windstorm.

How long does an asphalt shingle roof last in Tacoma?

Manufacturer-rated 20-30 years; realistic Puget Sound-region performance often runs shorter, driven by moisture cycling and wind exposure rather than manufacturer defect. See our replacement-cost guide for the full picture.

Can I get a shingle color that clears North Slope or Stadium-Seminary design review?

Yes — for properties inside those historic districts, we confirm the Landmarks Preservation Commission's material and pitch guidance (composition shingle is the typical historic material) and help choose a compliant option before ordering.

Do you charge for an estimate?

No. Estimates are free across Tacoma and Pierce County, including the drive. We walk the roof with you, check the deck from the attic side where we can, and hand you a written per-square price with tear-off and any deck repair broken out as their own lines.

Also worth a look

Related services

Roof Replacement

Full tear-off roof replacement for Tacoma and Pierce County homes and businesses — asphalt shingle, metal, or flat/low-slope, with Landmarks Preservation Commission design review handled for North Slope and Stadium-Seminary historic-district properties, and a written price by material before any work starts.

Asphalt Shingle Roofing in Tacoma, WA